Residential Infrared Thermography

Infrared Thermography in Chattanooga is an important part of the home inspection process. It is critical that it is understood that infrared thermography measures temperature and not moisture. 

While many wet areas will be cooler this is not always true. Infrared home inspection services do not replace a moisture meter. 

Infrared Thermography

It is critical that it is understood that infrared thermography measures temperature and not moisture. While many wet areas will be cooler this is not always true. A service that relies solely on thermal imaging home inspection in Chattanooga does not replace inspections that include thermography and a moisture meter. More importantly, when anyone tells you that infrared home inspections in Chattanooga are used to discover moisture you should realize that that is not true. Infrared thermography distinguishes cooler areas from warmer areas only. This information is useful to determine which areas should be further evaluated by the proper tools such as a moisture meter to determine if the area is WET. or NOT.

Scald warning hot water

How much does infrared thermography in Chattanooga cost when used in a home inspection? 

When having HomePro Inspection Inc perform your home inspection you will pay no additional fee for thermal imaging, infrared use for suspicious areas during the inspection. There is also no additional fee for moisture meter confirmation for suspicious areas during the inspection. While these tools are expensive, they are quite useful to perform a better and more accurate inspection giving you better value and more confidence about your purchase.
Artistic photo in infrared

Is infrared thermography necessary when performing a home inspection?

Infrared thermography is not necessary to perform a home inspection. Infrared inspections are another valuable tool for the diagnoses of certain issues if it is used correctly and within the parameters of its limitations. An infrared camera is basically a very sophisticated thermometer that measures temperatures for multiple areas simultaneous. There are other ways to determine what infrared can tell you it just might take you a bit longer to get there.

Infrared spots cooler areas

What are some of the most common misdiagnoses using infrared thermography?

The number one misdiagnoses using infrared thermography in a home inspection is calling something that is cool, 'WET'. For example, missing, above ceiling insulation in cooler weather can look the same as a wet ceiling area to the infrared camera in some instances.

Another misdiagnosis is calling a hot electrical area a problem without understanding what the connected load is to determine if a problem really exists.

The most embarrassing mistake that a new owner of an infrared camera can make is to report an actual reflection of a heat source as a problem. Consider the scenario where the inspector catches a glimpse of his own infrared reflection and writes down that an area was suspiciously hot when it was in fact the reflection of his own body heat off some reflective material such as a metal bowl or glass surface.

Hot door handle encountered by home buyer

Where is infrared thermography useful during a home inspection?

Hands down checking the heating and cooling systems with thermal imaging tools has been my favorite use for my FLIR brand system. Infrared gives definitive and accurate results that I can use at every home regardless of condition. Infrared confirms both heating and cooling function as well as exposes irregularities such as damaged ductwork.

Of course, infrared home inspection services in Chattanooga are useful locating issues that may not be present in every home such as missing insulation and pinpointing areas that need further evaluation by a moisture meter. Infrared is also useful in locating hot spots in an electrical system. For these examples interpretation of the results is crucial to understanding if there is a problem. For example, a hot spot in the electrical system simply could be a large appliance in use or it could mean that electrical arcing is occurring. Knowing the difference separates the novice from someone that understands the capabilities of infrared thermography.